☀
Account Enter the Lab
Courses  /  Science  /  Seeing Circuits
Science

Seeing Circuits

Read any schematic, solve circuits in your head, and follow a signal from a sensor to a screen: resistors, capacitors, filters, diodes and op-amps.
8 levels 47 lessons All ages Taught by Tesla 0 of 47 complete
THE SYLLABUS
I
Reading Schematics

0 / 6
▶
From Pictures to Symbols
Every part has a schematic symbol: a battery is a long and a short plate, a lamp a crossed circle, a switch a hinged gap, a resistor a zig-zag, a wire a line. A schematic shows what is connected, not where things sit.
Start
🔒
Wires and Nodes
A node is all the wire you can reach without passing through a part. Corners and dots don't split it, a crossing without a dot doesn't join, and every point on one node has the same voltage.
Premium
🔒
Ground and Reference
Ground is the node we choose to call 0 V, and every node voltage is measured from it. Move ground and the node voltages shift, but the voltage across each part, V_AB = V_A − V_B, stays the same.
Premium
🔒
Sources, Arrows and Signs
A source's + and − marks show which way it pushes. Current arrows and voltage marks are guesses: a negative value means the real direction is the other way. With current entering a part at +, P = V·I is positive and the part absorbs power.
Premium
🔒
Reading a Real Schematic
On a real schematic the letter names the part type and the number counts it (R3, C5, U1). Value codes put the unit letter where the decimal point goes (2k0 = 2.0 kΩ). U1A to U1D are four op-amps inside one chip, and labels with the same name are the same wire.
Premium
🔒
Level Review
Level 1 review: symbols, the + plate, value codes, ground, nodes, node voltages, V_AB, P = V·I, the ECG board's codes, and series loops.
Premium
II
Resistive Circuit Laws

🔒 7 lessons
III
Capacitors and RC Time

🔒 6 lessons
IV
Inductors

🔒 1 lesson
V
Sine Waves, Phasors and Impedance

🔒 7 lessons
VI
Filters and Bode Plots

🔒 6 lessons
VII
Op-Amp Golden Rules

🔒 7 lessons
VIII
Op-Amp Building Blocks

🔒 7 lessons